Automotive interior panels are a commonly used type of plastic nowadays, and they are widely applied in daily life. It is considered to be one of the lighter types among plastic sheets. The water absorption rate of automotive interior panels in water is very low, they have a very low density, good mechanical properties and heat resistance. Therefore, it is not without reason that they are loved by many manufacturers. However, the adhesion of automotive interior panel has always been a problem that troubles many industry professionals. So, let me explain to you how we should carry out the adhesive treatment for automotive interior panels.

1. Surface treatment: First, use a cloth to wipe off the oil stains or dust on the surface of the material.

2. Use a brush or scraper to evenly apply the plastic glue on the rear automotive interior panel to be bonded. The application of glue should be uniform in thickness and complete, without leaving any blind spots for bonding. If necessary, apply glue on both sides.

3. After applying the glue, let it stand for 5 to 8 minutes (it is advisable to wait until your fingers can't pull the glue off when touching it). Then, attach and apply pressure to make the two sides closely adhere.

4. Immediately after attaching, there is strength. It will dry for about 2 hours and then measure the strength after 24 hours.

This is the treatment method for the adhesion of automotive interior panels. I believe everyone has understood. In the future, when you need to bond automotive interior panels, you won't be unsure about what to do. In fact, there are many places where automotive interior panels are used in our daily life. So, we should pay more attention to this aspect. If you have any questions about this, you can call our contact number to communicate with us. If you need to purchase automotive interior panels, our company is also a very good choice!

automotive interior panel https://www.beeregal.com/automotive-interior-systems.html