Those in the printing industry all know that materials like glass, tiles, and metal cannot be printed directly. They need to be coated before printing. So, let's first talk about the benefits of using coatings:

I. Drying speed

The rapid treatment solution is formulated with special chemical materials and dries within about three minutes after spraying, especially on relatively smooth materials such as glass, porcelain and metal.

Second, the printing quality is better

If it is directly printed on certain materials, mainly those that are lubricating and do not absorb moisture, the effect will be poor. However, after using the treatment liquid, the effect is extraordinary. Whether the material is bent and folded or placed for an extremely long time, there will be no cracking, splitting or other phenomena on the surface of the material.

Three. Wear-resistant and waterproof

Due to the presence of adhesive components in the ingredients of the treatment solution, the adsorption force between the ink and the material after printing is extremely superior, far exceeding the wear resistance in the untreated state by several times. The water resistance of the material after using the treatment solution is also several times greater than that in the untreated state.

Fourth, it is highly suitable for certain special industries. The treated liquid has the characteristics of flexibility, transparency, and impact resistance, and is an indispensable new process in some industries.

Customers who have used weak solvent flatbed printers all know that 90% of materials such as glass, tiles, metal and leather must be coated when printed with this machine. Because weak solvent ink is directly used to print patterns, there is a high possibility of ink accumulation, slow drying speed, and poor printing and spray-painting effects. Pre-printing processing, that is, coating, must be carried out.

3d automatic hologram master x-y table https://www.zhhologram.com/product-200016